|
| Frames | |
Frames
manufactured from reforested wood, or derived from areas of forest |
management
of pines, cedar and eucalyptus, with or without finger joint. The raw
material is dried in stoves, and is processed in high technology framers. We also have special models for manufacturers of artistic canvas, furniture industry and constructors. Additionally we are able to develop special models with the promptness required by our clients’ needs. |
 |
| Artistic canvas chassis | |
Chassis
made in pine and cedar with finger joint. The wood, with a length of 3,000
mm, is dried in stoves. We offer canvas and panels with the following
dimensions. |
| Canvas | – |
13x22; 14x27; 18x37; 19x47 | |
| Panels | – |
31x27; 31x40; 36x27; 37x18; 40x31 |
| Blades | |
Knife
blades in eucalyptus and pine, certified by the Forest Stewardship Council
(FSC), with maximum length of 3,200 mm, minimum width of 100 mm and thickness
ranging from 0.5 mm to 2.0 mm. Turned blades in pine and eucalyptus for doors and plywood. |
|
| Panels | |
Made
in pine, eucalyptus, cedar, amapa with or without finger joint. |
The
wood is dried in stoves with plates from 20 mm to 70 mm, glued laterally
with PVA adhesive (norm DIN EN 204 class D4) with various lengths and
widths. Special dimensions for architects and interior designers. |
 |
| Door Jamb | |
Made
with pinus wood type panel, for doors in general, with primed finishing
or Imbuia, Mogno, Canela dyed finishing. |
|